Fabric And Garment Testing

1.Manual clamp sample and replace nozzle.
2.Microprocessor processed, test results directly displayed.
3.Built-in continuous test mode, test units can be switched based on demands.
4.English touch screen menu operation, equipped with computer port.

1. Flow meter test mode, full capacity selection, high precision sensor dynamic measurement. 32 bits ARM high speed processor auto calculation, test results directly display.
2. Color touch screen display, test units switched freely and can be printed out directly.
 (cfm, cm3/ cm².s, m/s, L /d m².min, L/m².s, m3/ m².min, etc).
3. Multiple test area optional and can be recognized automatically.
4. Adopts imported fan, variable frequency motor control, low noise and high efficiency.
5. Automatically change pore plate to meet different measuring requirements.
6. Automatically finish sample clamping and loosen to reduce test area change due to manual clamping.
7. Provide continuous test mode to improve test efficiency.
8. Available to connect with computer, machine is controlled by professional test software.

1. Simple device, easy for operation.
2. The structure is in stainless steel materials.
3. Widely used in many kinds fabric.
4. It has good repeatability of the test result

The two ends of the specimen are fixed so that the specimen is bent continuously, so that the bending part of the specimen is subjected to a series of gentle friction.The abrasion condition of the specimen was observed visually to evaluate the shear and flexural friction resistance of the specimen.

This instrument uses solvent extraction method to extract the oil in the fiber. The principle is the same as the Soxhlet method. It uses ether or other solvents to extract the oil on the surface of the fiber, then evaporates the solvent, and then measures the oil content.

1. Adopting advanced mechanical design technology, manufacture technique and microcomputer controlling technology, it can collect data accurately. 
2. Using white background light and ultra-bright LCD, it can show test data clearly. 
3. According to the measurement of the viscosity of the liquid to choose the speed with the use of speed, meet the requirements of different range of measurement.

The same direction of the 2 pieces of sample cloth overlap with each other, into the instrument fixture and apply a certain load, with a certain speed and stroke reciprocating friction requirements of the number of times, observe the crack on the sample surface, damage or cloth and coating separation, in order to assess the sample rubbing resistance.

1 Using touch screen operation interface, simple operation, intuitive and convenient.
2 the sample can be tested Angle: 41.5°, 43°, 45°, convenient Angle positioning, in line with different test standards.
3 Adopt infrared measurement method with quick response and accurate data.
4 The transmission device is ball screw and linear guide rail to ensure smooth operation and no swing.
5 The instrument has a printing interface, which can directly type out data report.
6 The unit can be switched to cm mm in

Place sample between upper and bottom pressure plate with adding a certain of load), and dial indicator will display the thickness of test sample.