Products

This system ensures that the thickness is being measured under the same controlled conditions for each sample. To measure the thickness of any sample, lift the deadweight by operating the lever and insert the material between the anvil and the presser foot. Lower the deadweight using the same lever.

The instrument through the given diameter and quality of the steel ball in the specified height of the free fall on the foam sample, calculated the ball rebound height and steel ball drop height ratio of percentage both springback rate, with springback rate of foam elastic energy. 

According to the principle of light and white materials or products are easy to change color, the effect of various lighting is tested. This machine is equipped with a specimen turntable, which can ensure the specimen to expose to light uniformly so that the test precision can be improved.

Beautiful appearance:Water Vapour Absorption Tester in stainless steel material, durable and beautiful.
Accurate size:Each with an internal diameter of 35 mm and a volume of 100 cm cubed, which comply with standards.
Test pot variety:Test pots available with 6 or 8 to meet different demands.
Precision & standard based:ISO 17025 Calibration Certificates are able to convince the cutting accuracy of Water Vapour Absorption Tester.

To determine bonding strength property for outsole and vamp of shoe heel and toe.

This instrument is used to measure the resistance value of footwear to understand its antistatic performance.

Working Position Variety:Available with 6 or 8 testing positions according to clients’ demands.
Standard Device:Comply with SATRA TM172, EN ISO 20344, BS 3144, IUP 15, SLP 25, DIN 53333
Friendly design:Beautiful stoving varnish and color matching to display in your laboratory.
Accurate Time Recorder:Built-in timer provided to record the time of the test.

1. Upper fixtures are driven by motor to do reciprocating motion with horizontal shaft. Downward moving angle is 22.5  0.5.
2.Flexing times can be set and real flexing times is display at real time.
3.Counter stop to count when reached preset test times and machine stop to work automatically.
4.12 or 24 working positions can be optional.
5.With manual location function.

The test piece is continuously wetted on one surface and is flexed and compressed in the same manner as the sole of a shoe during walking. This enables various aspects of heavy leather water resistance to be measured with respect to time.

Take two shoelaces cross reciprocally. Fix the both ends of one shoelace onto the movable fixture which is able to do reciprocating linear motion. The other piece of shoelace, fix one end onto corresponding fixture, the other end is connected to a weight through the pulley. Two reciprocally crossing shoelaces rub against each other via movable fixtures’ reciprocating motion. Interval time can be set. When preset test times reached, machine stop working automatically. Interval time reaches, machine continue to work. In such reciprocal work until reaches preset test times reached or sample break, counter stop to counting, so as to be able to test sample resistance to abrasion property.

1.Strictly comply with International standards including EN ISO 20344 .
2.Support to test various safety shoes to ensure the insulation to heat property.

Mount the specified sample onto the friction plate horizontally as standard required. The sample surface needed to test face down, applying certain load, use the method of horizontal pulling to pull the sample at a certain speed, measured its maximum tension, and calculate the static coefficient of friction, so as to measure sample’s static non-slip performance.