Products

1.The  whole  machine  is  made  of   high-quality  stainless  steel  inside  and  outside,  with industrial structural design, anti-corrosion, beautiful and exquisite, and durable.
2. Color touch screen control, Chinese and English menu, human-machine dialogue mode, easy to operate.
3. Adopt high-performance continuously variable speed motor with digital speed setting.
4. Built-in 13 sets of GB/T 8629 programs, 13 sets of ISO 6330 programs, 3 sets of customized
5.The observation window type drainage filter is convenient for observation and timely cleaning, and is easy to clean.

1) the machine is made of SUS304L stainless steel mirror plate, with beautiful appearance and reasonable structure.
2) the card cup device adopts high-quality 304 stainless steel spring, and can be used for sample testing with flasks of different specifications, which is convenient and fast to operate.
3) equipped with high-performance programmable computer temperature control system, which can compile and store ten processes, and each process can be programmed in ten steps;The heating rate and holding time can be programmed, and the whole process flow can be controlled automatically.
4) PT100 temperature probe produced by DTC is equipped with high temperature measurement accuracy and long service life.
5) the number and volume of test cups can be customized according to customers' needs (the maximum beaker capacity is 500ml).

1. Whole machine in stainless steel material with strong and durable, high corrosion resistance advantage.
2. High performance programmable computer temperature control system, equipped with heating and cooling rate and accurate control of holding time.
3. Equipped with precision heating system, PT100 temperature control probe, available for edit and save 10 craft.
4. Drive system: Gear drive, small starting torque, smooth, light load, low noise.
5. Beakers material: resistant to corrosion high quality SUS 304 stainless steel, seal gasket in Teflon combine with silicone rubber material, cup cage with rotary times 40 RPM.. Test cups vertically rotate with good dye uniformity.
6. Stainless steel cooling water tube, equipped with insulation cover, fast cooling and save energy. 
7. Equipped with aluminum shell motor and reducer to reach good heat dissipation effect.1. Whole machine in stainless steel material with strong and durable, high corrosion resistance advantage.
2. High performance programmable computer temperature control system, equipped with heating and cooling rate and accurate control of holding time.
3. Equipped with precision heating system, PT100 temperature control probe, available for edit and save 10 craft.
4. Drive system: Gear drive, small starting torque, smooth, light load, low noise.
5. Dye cups: 12 or 24 pieces, capacity 150㏄, 250㏄, 300㏄, 400㏄, 450㏄, 500㏄(Optional)

1.Microcomputer control dry temperature and strictly control the temperature of air outlet below 80°.
2.Freely select dry time.

1.The inner tank is made of stainless steel, and the four corners of the inner tank are semi-circular arc transition, which is convenient for the cleaning of the studio.
2.Adopt natural convection circulation method, no noise, avoid sample volatilization during the test.
3.Adopt microcomputer P.I.D temperature controller with over-temperature deviation protection and digital display, with timing function, accurate and reliable temperature control.
4.Multi-segment programmable controller (optional)
5.Multi-segment LCD programmable controller, one-screen display of multiple parameters, and menu-type operation interface, which can simplify the complicated test process and truly realize automatic control and operation.
6.7 groups of 63 steps can be pre-programmed, each group has 9 steps, and the set time of each group is 0~5999 minutes.

1.Structural design: The box shell material is made of cold-rolled steel plate, which is environmentally friendly sprayed, and has strong corrosion resistance; the studio is made of SUS304 mirror 2.Energy-saving design: non-fluorine environmentally friendly high-efficiency refrigerant, fast cooling speed, high cooling efficiency, low power consumption.
3.Humanized design: the height of the shelf can be adjusted at will and free assembly; the outer door adopts a magnetic door seal with good airtightness; the outer door is equipped with an observation window.
4.Safety guarantee: The equipment is equipped with a leakage protection device and a buzzer alarm system.

1.Fuzzy PID controller, temperature control precision fluctuation is small, with timing function, maximum setting time is 99 hours 59 minutes.
2.The wind tunnel system of forced convection can improve temperature response speed, improve temperature uniformity and reduce temperature fluctuation.
3.Door interior has a glass door, easy to observe, when the glass door open, breeze circulation and heating automatically stop, no temperature overheat.
4.Mirror stainless steel liner, electric heating pipe heating mode, heating speed, so that uniform heating box.
5.Independent temperature limit alarm system, if the temperature exceeds the limit, the system will be automatically interrupted to ensure the safe operation of the experiment without accident.(optional)
6.Printer or RS485 interface for connecting to a printer or computer to record changes in temperature parameters.(optional)

1.Machie body in SUS 304 stainless steel material, beakers in SUS 316 stainless steel material
2.Easy open door
3.Quick-lock retention bars
4.Device will alarm once test finished.
5.Door safety switch stops rotor if opened
6.Large 24 container capacity and also available for customized.
7.550 ml and 1200 ml beakers in stainless steel material are optional.
8.Suport programe procedure(order addtionally)

1. The inner and outer boxes are all made of stainless steel, which is beautiful and durable.
2. Touch screen control, Chinese and English menus, man-machine dialogue mode, easy to operate.
3. Built-in 5 sets of GB standard programs, 5 sets of AATCC standard programs, and reserved 3 sets of freely editable experimental programs to meet more testing needs.
4. The temperature and time curve, the real-time display of the experimental process, can better observe whether the temperature change meets the standard requirements.
5. The instrument can be installed with national standard and American standard test cups separately or at the same time.

Under the certain of pressure and within predetermined stroke, make sample rub with white cotton cloth repeatedly for specified times. By comparing the white cotton cloth after rubbed with Gray scale for assessing staining to determine colorfastness grade.

Crockmeter is used to determine colourfastness to wet and dry rubbing. Apart from textiles, also available for carpets, laminates, and printing inks, as well as the micro-scratch resistance of lacquers, coatings and painted surfaces. Motorized for frequent use and long run tests, fitted with digital electronic counter with strokes up to 9999.

1.Multi-reading feature allows auto-read, timed-read and continuous-read. 
2.Automatic/Manual temperature compensation ensures accurate results. 
3.Auto-hold feature senses and locks the measurement endpoint.
4.Data Storage 500 sets (GLP-compliant).
5.Support for USB or RS-232 communication.
6.IP54 waterproof.
7.1-5 points calibration with Standard Recognition.
8.Selectable pH buffer groups, including NIST, DIN, GB，USA，MERK
9.Automatic electrode diagnosis with pH slope and offset display.