Products

Under once per second, free fall motion, 0.68J energy, pendulum bob fall down to the vertical position from horizontal position, this machine impact female’s shoe heel until heel rupture / breakage or required fatigue times reached.

1.Durable: Impact head adopts SKD 11 with strong resistance to impact ability to reduce impact lose. Wheel gear adopts 45# steel with strong resistance to abrasion ability to reduce gear lose, so as to improve service life.    
2.Harmony: Fixtures device is able to move up and down and rotate to a certain of angle to make the clamping position have better harmony.
3.Easy operation: Easy understandable operational process.
4.Accuracy: Energy accurate to 0.68J to make test results more accurate.
5. Substantivity: Test results can be read out directly from scale.

Workstations Variety:Test position    1, 2, 3, 4, 5, 6 or more, customized.
Safety Cover:Safety cover equipped to ensure test security. Test and count stopped automatically once cover opened . Restart running to continue the counting.
Necessary Accessory:Necessary accessory including spanner and Chisel cutter(2mm) provided to conduct tests after receive our instrument.
Simple Operation:Sample installation, testing times preset, then you can start your test in ease.

Automatic Counting:Equip with digital counter, automatically stop after test finished.
New Version Available:New version with a self-tracking suction head that can be connected to a standard vacuum cleaner without the operator having to keep an eye on it. 
Necessary Accessory:Necessary accessory provided to conduct tests after receive our instrument.
Simple Operation:Sample installation, testing times preset, then you can start your test in ease.

1. Counter with 5-bit electronic LCD display;
2. Can be connected with dust collector to collect powder produced in test process;
3. Equip with 3 pieces of dial indicators to set testing pre-wear thickness.
4. With protective devices: short circuit protection, automatic stop, motor control device and support device for fine-tuning nut.

The dynamic waterproof performance of shoes is tested by simulating the state of human feet walking in water with shoes on. Evaluate the waterproof ability of shoes by bending the forefoot part of the shoe at a certain angle and frequency.

1.LED-SLD806 integrated display control box, menu operation mode;
2.Precision frequency conversion drive motor, smooth running, low noise;
3.One-button full-automatic test, easy and convenient operation;
4.High-precision selection of bearings, stable rotation, long active life;
5.2-station structure vertical design, bending stability, high efficiency;
5.Adjustable front and rear fixing fixture, screw-type screw tightening fixing, tight fixing;
6.Adjustable speed, adjustable angle, movable heel fixing, adjustable size;

Automatic Counting:Equip with digital counter, automatically stop after test finished.
Application Variety:The test was conducted for the whole shoe, testing all aspects of the shoe, including materials, structure, joints and shoe sole adhesion. The same type of machine can also be used to test the effect of the protective coating on shoes.
Necessary Accessory:Necessary accessory provided to conduct tests after receive our instrument.
Simple Operation:Sample installation, testing times preset, then you can start your test in ease

The finished product sample or material sample is installed on the corresponding fixture of this instrument, and the sample is placed vertically with the required height of flame combustion for a certain period of time, and relevant data (such as combustion time and combustion rate) is recorded to evaluate its combustion performance.

1、With all stainless steel material appearance to prevent smoke;
2 Using industrial colour touch screen display control, durable, convenient and simple operation;
3、Motor drive ignition mechanism, automatic ignition is easy to operate;
4, flow meter to adjust the flame height, no need for constant gas pressure;
5, the instrument resistance wire ignition time can be adjusted, the use of different environments to ensure ignition;
6, the instrument test data directly display the second mark burning rate and the third mark burning rate.

1. The appearance of all stainless steel materials is used to prevent smoke.
2. It adopts industrial color touch screen display control, durable, convenient and simple to operate.
3. The motor drives the ignition mechanism, and the automatic ignition operation is convenient.
4. The flow meter adjusts the flame height, without the need for constant gas pressure.
5. The ignition time of the resistance wire of the instrument can be adjusted to ensure ignition under different environments.
6. Automatically judge the burning rate after burning for a certain distance.

1 Touch screen control, English and Chinese menu, man-machine dialogue mode, easy to operate.
2 Built-in thermal printer for quick on-site printing of test results.
3 Report statistics, real-time display test curve intuitive analysis, etc.
4 High-precision sensor, good linearity, strong stability.