Home
Nonwoven Textile Tester
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Sanitary Napkin Water Absorption Tester Nonwoven Water Absorption Tester MB01
Overview
Used for determination of water absorption rate and height of medical and sanitary nonwovens. It includes liquid absorption time, liquid absorption amount and liquid core absorption rate.
Application
Medical nonwoven fabrics
Medical nonwoven fabrics
Medical nonwoven fabrics
Medical nonwoven fabrics
Standards
FZ/T 64012.2, GB/T 24218.6
Key Parameters
| Model | MB01 |
| Measuring range | 0 ~ 1000g±0.01g |
| Testing accuracy | 0.01%F-S |
| Test speed | 1 ~ 10mm/s, settable Dropping time: 0~150s, settable |
| Liquid absorption and drop time | 0 ~ 999s, arbitrarily set |
| Sample size | Liquid absorption specimen size: 100 × 100mm; core absorption rate specimen size: 30 × 250mm |
| Printing system | Embedded thermal printer |
| Power source | AC220V 50Hz 100W(Can be specified by user) |
| Dimension | 540×380×650mm |
| Weight | 26kg |
Product Details
Straight Ruler
Steel mesh
Stainless steel specimen clamp
Miniature Printer
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
