Home
Fabric And Garment Testing
- Plastic And Film Packaging Test Equipment
- Sample preparation
- Carton Package Testing Equipment
- Toys Testing Instrument
- Environmental Testing Equipment
- Footwear Testing Equipment
-
Textile Testing Equipment
- Zipper & Button & Velcro Tape Tester
- Protective Clothing & Mask Tester
- Gloves & Socks Tester
- Feather & Down Tester
- Nonwoven Textile Tester
- Geotextile Tester
- Flammability Test Equipment
- Yarn and FiberTesting
- Washing & Laundering
- Tensile Burst Tear Strength Tester
- Fabric And Garment Testing
- Dyeing and Finishing Tester
- Color Fastness Testing
- Abrasion and Pilling Tester
0102030405
Textile Machinery Pilling Assessment Box Testing Machine Universal Pilling Assessment Viewer M028
Overview
To determine the pilling results under specified light condition of this pilling assessment box for fabrics. The pilling results including Martindale Pilling, Random Tumble Pilling, ICI Pilling, circular locus method pilling test, Brush/Sponge Pilling) or snagging test(ICI Snagging).
Application
WOVEN FABRIC
KNITTED FABRIC
FLEECE FABRIC
Standards
GB/T 4802.3 ISO12945 ASTM D3512 ASTM D4970 BS5811 ASTM D5362, IWSTM 152
Key Parameters
|
Model |
M028 |
|
Light Source |
F8T5CW |
|
Lamp Power |
8W |
|
Observation area size |
340×165×240mm
|
|
Power Supply |
1∮ AC 220V 50/60Hz |
|
Dimensions |
340×280×240mm |
|
Weight |
10kg |
Product Details
Lamp
The reverse side
Observation table
Production Processes
Process design and design and manufacture of specialized process equipment
Machining of components
Assembly of products
Comprehensive testing of machines
Scenarios of Use
Laboratory
Textile factory
Operation
Connecting the air supply
Connect the air supply to the instrument.
Add distilled water
Connect tube from the freestanding funnel to the water connector located at the back right-hand corner of the SST unit. Add distilled water.
Put in filte
Unscrew the screws and remove the top plate,Take away the reflector.
Put in filter.
Install the xenon lamp
Install the xenon lamp and connect the lamp cabler.Replace the top cover and tighten the set screws.
Mount the sample
Mount the sample on the sample clamp.
BPT Sampling
Place the sample into the test chamber and close the door.Be careful to avoid covering the BPT sensor.
Transportation
Packing System
1. Products are covered with air bubble film before put them into composite board standard export wooden case. To ensure waterproof, moistureproof, corrosion, anti-corrosion and security.
2. Package with shipping mark in line with International and national standards, which is easy for handling, loading and unloading.
3. Packing materials selected accorded with economic and safety requirements
4. Compliance with environmental requirements.
For Metal Box Package
For Carton Package
For Wooden Case
