Textile Testing Equipment

1.Grading viewing board equip with 2 units of 2400mm or 1200mm length cold light sources.
2.Equip with switch control and high frequency power supply control devices.
3.Grading viewing board support to be mounted on the wall or sliding cart or customized.

1.Grading viewing board equip with 2 units of 2400mm or 1200mm length cold light sources.
2.Equip with switch control and high frequency power supply control devices.
3.Grading viewing board support to be mounted on the wall or sliding cart or customized.

This instrument is suitable for dry cleaning test of woolen, fur, cotton, linen, wool, chemical fiber and other fabrics.

1.6th Sense
2.Agitator
3.White porcelain drum
4.Lid lock
5.Dual suspension system 
6.Imbalance control 
7.Fabric softener dispenser
8.Bleach dispenser

1, the machine has compact structure, small bath ratio, PLC with touch screen control, the entire process automatic control, automatic High degree of transformation.
2, dyeing fluid circulation mode: by the corrosion resistant mixed flow pump with reversing device, according to the process needs to achieve positive and negative dyeing fluid Loop.
3, groove sealing form: silicone rubber O-type sealing ring.
4, equipped with pneumatic valve, master cylinder with flap type level controller, equipped with safety interlock mechanism, master cylinder with no Rust steel safety valve, manually open cover, and temperature control, can be set 85℃ safety protection.
5, dyeing liquid reversing control, computer automatic reversing control.
6, the main material: the selection of high-quality stainless steel plate production.

1.Configure special dyeing computer for dyeing machine;
2.Dyeing cylinder is made of SUS304 stainless steel;
3.Equipped with frequency converter and frequency conversion speed regulation;
4.Fill the lower cylinder with washing water;
5.Equipped with water level gauge and scale;
6.Equipped with feeding tank and feeding control valve;
7.energy-saving design, reduce the use cost, save power consumption;
8.Operation mode: with automatic operation and inching function;
9.The feeding drum is a round one;
10.Feeding control valve is inside the body;

1.Consists of rollers driving system, hydraulic compression system, cooling device for rollers, etc.
2.High precision heating system, accurate temp. & time control.
3.Emergency stop Equipped to protect the machine and operators.

It is composed of a pneumatic electric small padder and a saturated steam box unit. Normally, the saturated steam temperature is 102+/-1℃. continuous feeding and discharging of the cloth, and the cloth sample enters the steam box after passing through the liquid tank through the roller. Frequency conversion speed control, automatic setting through the steam box time, a one-time complete even pressure belt steam, can avoid the influence of air REDOX.Pad dyeing and reduction dyeing process VAT dyes.

Apply a certain amount of load on the drum, open the machine table to make the drum rotate, put the fabric end in the middle of two drums, the drum drives the fabric to roll, and at the same time remove the excessive moisture in the fabric.

It is on the basis of absorbing foreign small same type rolling cars combine the domestic current situation of the pad dyeing post-processing technology digestion renovation and become one of the most advanced pad dyeing small prototype.

1.Replace traditional oven to provide amount of, fast and flat dry test template, so as to reduce unnecessary waiting time for drying, and enhance color test efficiency.
2.Can be used for color fixation test after test samples came out from padding machine quickly, so as to determine whether the samples are abnormal.
3.Can be used as padding color fixation machine and printing dryer.
4.Can simulate and forecast color changing degree for resin process or drying dyestuff.
5.Can provide flat and correct test samples to enhance color test precision via computer and correct finished products and flat color sample.

Sample preparation (Needle plate shelf) - Automatic feedstock - Automatic count - Auto return of material and finish test.